LTC3676ILXE#PBF
LINEAR TECHNOLOGY LTC3676ILXE#PBF 芯片, 电源管理单元, 8路输出, HLQFP-48
The is a complete Power Management Solution for advanced portable application processor-based systems. The device contains four synchronous step-down DC/DC converters for core, memory, I/O, system on-chip SoC rails and three 300mA LDO regulators for low noise analog supplies. The LTC3676-1 has a ±1.5A buck regulator configured to support DDR termination plus a VTTR reference output. An I2C serial port is used to control regulator enables, power-down sequencing, output voltage levels, dynamic voltage scaling, operating modes and status reporting. Regulator start-up is sequenced by connecting outputs to enable pins in the desired order or via the I2C port. System power-on, power-off and reset functions are controlled by pushbutton interface, pin inputs or I2C. The LTC3676 supports i.MX, PXA and OMAP processors with eight independent rails at appropriate power levels.
- .
- Quad I2C adjustable high efficiency step down
- .
- DDR power solution with VTT and VTTR reference
- .
- Pushbutton ON/OFF control with system reset
- .
- Independent enable pin-strap or I2C sequencing
- .
- Programmable autonomous power-down control
- .
- Dynamic voltage scaling
- .
- Power good and reset functions
- .
- Selectable 2.25 or 1.12MHz switching frequency
- .
- Always alive 25mA LDO regulator
- .
- 12µA Standby current