G3T22AB-S

Switch Toggle ON None ON DPDT Round Lever Gull Wing 0.1A 28VAC 28VDC 0.4VA PC Mount with Bracket Stick

G Series toggle switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. The G Series toggles have not been tested for UL recognition or CSA certification.

得捷:
SWITCH TOGGLE DPDT 0.4VA 28V

艾睿:
This process sealed G3T22AB-S toggle switch from NKK Switches is the best at minimizing lag between switches in your design. This device has a maximum current rating of 0.1 A @ 28VAC 28VDC. It has a DPDT configuration. This toggle switch has a minimum operating temperature of -30 °C and a maximum of 85 °C. The G3T22AB-S toggle switch has a gull wing termination style. The maximum AC voltage rating is 28 VAC and the maximum DC voltage rating is 28 VDC. This product is 11 mm long, 12.9 mm tall and 7.6 mm deep.

Allied Electronics:
SWITCH TOGGLE DPDT 0.4VA 28V

Chip1Stop:
Switch Toggle ON None ON DPDT Round Toggle Gull Wing 0.1A 28VAC 28VDC 0.4VA PC Mount with Bracket Stick-Tube

Verical:
Switch Toggle ON None ON DPDT Round Lever Gull Wing 0.1A 28VAC 28VDC 0.4VA PC Mount with Bracket Stick

Powell:
ULTRA MINIATURE TOGGLE/SMD