ATSTK600-LCD160
LCD Touch Screens Development Tool
is a breakout board for a 160 segment LCD display. It is used together with the STK600 and an ATmega MCU w/ LCD driving capabilities. The STK600-LCD160 is connected to the STK600 through a set of 10 pin ribbon cables. The ATmega devices that only supports 100 segments can also be used, but with a reduced set of segments on the LCD. The STK600-LCD160 should then be connected to the STK600 through the four rightmost headers.
- .
- Board for a 160 segment LCD display
- .
- Used together with the STK600 and an ATmega MCU w/ LCD driving capabilities
- .
- The board is designed to easily connect to STK600 with flat cables
- .
- LCD module for testing with the megaAVR LCD Controller/driver
- .
- Can also be used for LCD enabled AVR XMEGA no SW drivers available