MK60FN1M0VMD15
NXP MK60FN1M0VMD15 微控制器, 32位, K6 以太网系列, ARM 皮质-M4, 150 MHz, 1 MB, 128 KB, 144 引脚, MAPBGA
The is a 32-bit Kinetis K6x Microcontroller with Ethernet crypto, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 150MHz. The device incorporates 1024kB internal flash, 128kB internal RAM, four 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, two I2C modules and two I2S modules.
- .
- ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
- .
- Serial programming interface EzPort
- .
- FlexBus external bus interface
- .
- NAND Flash controller interface
- .
- 3 to 32MHz and 32kHz Crystal oscillator
- .
- Multi-purpose clock generator
- .
- Multiple low-power modes to provide power optimization based on application requirements
- .
- Memory protection unit with multi-master protection
- .
- 32-channel DMA controller, supporting up to 128 request sources
- .
- External watchdog monitor and software watchdog
- .
- Low-leakage wakeup unit
- .
- Hardware CRC module to support fast cyclic redundancy checks
- .
- Hardware random-number generator
- .
- Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1 and SHA-256 algorithms
- .
- 128-bit Unique identification ID number per chip
- .
- Low-power hardware touch sensor interface TSI
- .
- Programmable gain amplifier PGA up to x64 integrated into each ADC
- .
- Four analog comparators CMP containing a 6-bit DAC and programmable reference input
- .
- Programmable delay block
- .
- Two 8-channel Motor control/general purpose/PWM timers