STM32F100RDT6BTR
STMICROELECTRONICS STM32F100RDT6BTR 微控制器, 32位, 线路接入, ARM 皮质-M3, 24 MHz, 384 KB, 32 KB, 64 引脚, LQFP
The is a high density access line STM32 F1 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M3 RISC core operating at a 24MHz frequency, high speed embedded memories Flash memory up to 384kB and SRAM up to 32KB and an extensive range of enhanced peripherals and I/Os connected to two APB buses. This device offer one 12-bit ADCs, two 12-bit DACs, up to nine general purpose 16-bit timers and an advanced-control PWM timer, as well as standard communication interfaces - up to two I²Cs, three SPIs, one HDMI CEC, three USARTs and two UARTs.
- .
- 24MHz Maximum frequency, 1.25 DMIPS/MHz Dhrystone 2.1 performance
- .
- Single cycle multiplication and hardware division
- .
- Flexible static memory controller with 4 chip selects, supports SRAM, PSRAM and NOR memories
- .
- LCD parallel interface, 8080/6800 modes
- .
- Clock, reset and supply management
- .
- POR, PDR and programmable voltage detector PVD
- .
- 4 to 24MHz Crystal oscillator
- .
- Internal 8MHz factory trimmed RC
- .
- Internal 40kHz RC
- .
- PLL for CPU clock
- .
- 32kHz Oscillator for RTC with calibration
- .
- Sleep, stop and standby modes
- .
- VBAT supply for RTC and backup registers
- .
- Serial wire debug SWD and JTAG interfaces
- .
- 12-channel DMA Controller
- .
- Two watchdog timers Independent and window
- .
- SysTick Timer
- .
- 96-bit Unique ID