UC2526

稳压脉宽调制器

The UC1526 is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. Included in an 18-pin dual-in-line package are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and setting logic, and two low impedance power drivers. Also included are protective features such as soft-start and under-voltage lockout, digital current limiting, double pulse inhibit, a data latch for single pulse metering, adjustable deadtime, and provision for symmetry correction inputs. For ease of interface, all digital control ports are TTL and B-series CMOS compatible. Active LOW logic design allows wired-OR connections for maximum flexibility. This versatile device can be used to implement single-ended or push-pull switching regulators of either polarity, both transformerless and transformer coupled. The UC1526 is characterized for operation over the full military temperature range of -55°C to +125°C. The is characterized for operation from -25°C to +85°C, and the UC3526 is characterized for operation from 0° to +70°C.

.

8 To 35V Operation

.

5V Reference Trimmed To ±1%

.

1Hz To 400kHz Oscillator Range

.

Dual 100mA Source/Sink Outputs

.

Digital Current Limiting

.

Double Pulse Suppression

.

Programmable Deadtime

.

Under-Voltage Lockout

.

Single Pulse Metering

.

Programmable Soft-Start

.

Wide Current Limit Common Mode Range

.

TTL/CMOS Compatible Logic Ports

.

Symmetry Correction Capability

.

Guaranteed 6 Unit Synchronization