MA330025-2
MICROCHIP MA330025-2 插入式模块, 图形, DSPIC33EP512MU814
The is a 144-pin dsPIC33EP512MU814-I/POT plug-in module. It is intended to be used with the explorer 16 board DM240001 or DM240002 for general-purpose application or for graphics application development with the addition of the graphics PICtail plus daughter board AC164127. These dsPIC33E devices contain a peripheral pin select PPS feature that allows most of the Digital peripherals to be remapped to use any number of pins on the device. Because the dsPIC33EP512MU814 device has 144-pins and the PIM socked can only route 100 pins down to the explorer 16 board, 28 I/O pins are multiplexed using zero ohm resistors. Designers can utilize the PPS feature and modify the functionality by adding or removing these resistors. In addition, 32 I/O pins are routed to test points on top of the PIM PC board to provide full access to all available pins.
- .
- Modified Harvard architecture with 16bit wide data path, 24bit wide instructions
- .
- Two 40bit accumulators with rounding and saturation options
- .
- Two master time base modules can control dual 3-phase motors simultaneously
- .
- Up to seven PWM generators, Two PWM outputs per PWM generator and 8.32ns PWM resolution
- .
- 32bit position counter and 32bit index pulse counter
- .
- Two independent ADC modules, Flexible and independent ADC trigger sources
- .
- Nine 16bit timers/counters. Unused output compares can be used for a total of 25 timers
- .
- 16 input capture, 16 output compare/ PWM, Hardware real-time clock and calendar
- .
- 15 channel DMA with user-selectable priority arbitration
- .
- Real time clock and calendar RTCC module