ADATE302-02BBCZ

500 MHz双通道集成DCL ，提供差分驱动器/接收，电平设置DAC和每引脚PMU 500 MHz Dual Integrated DCL with Differential Drive/Receive, Level Setting DACs, and Per Pin PMU

Product Details

The ADATE302-02 is a complete, single-chip solution that performs the pin electronic functions of the driver, the comparator, and the active load DCL, per pin PMU, and dc levels for ATE applications. The device also contains an HVOUT driver with a VHH buffer capable of generating up to 13.5 V.

TThe driver features three active states: data high mode, data low mode, and term mode, as well as an inhibit state. The inhibit state, in conjunction with the integrated dynamic clamp, facilitates the implementation of a high speed active termination. The output voltage range is −2.0 V to +6.0 V to accommodate a wide variety of test devices.

The ADATE302-02 can be used as either a dual single-ended drive/receive channel or a single differential drive/receive channel. Each channel of the ADATE302-02 features a high speed window comparator for functional testing as well as a per pin PMU with FV or FI and MV or MI functions. All necessary dc levels for DCL functions are generated by on-chip 14-bit DACs. The per pin PMU features an on-chip 16-bit DAC for high accuracy and contains integrated range resistors to minimize external component counts.

The ADATE302-02 uses a serial bus to program all functional blocks and has an on-board temperature sensor for monitoring the device temperature.

**Applications**

.

Automatic test equipment

.

Semiconductor test systems

.

Board test systems

.

Instrumentation and characterization equipment

### Features and Benefits

.

3-level driver with high-Z mode and built-in clamps

.

Precision trimmed output resistance

.

Low leakage mode typically <10 nA

.

Voltage range: −2.0 V to +6.0 V

|

.

1.0 ns minimum pulse width, 1 V terminated

.

Window and differential comparator

.

>1 GHz input equivalent bandwidth

.

±12 mA maximum current capability

---|---