TAS5706
具有 EQ、DRC 和反馈(s/w 控制)的 20W 立体声数字音频功率放大器
The is a 20-W, efficient, digital audio power amplifier for driving stereo bridged-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors and MPEG decoders, accepting a wide range of input data and clock rates. A fully programmable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer or headphone PWM outputs.
The TAS5706 is a slave-only device receiving all clocks from external sources. The TAS5706 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
- .
- Audio Input/Output
- .
- 20-W into an 8-Ω Load From an 18-V Supply
- .
- Two Serial Audio Inputs Four Audio Channels
- .
- Supports Multiple Output Configurations:
- .
- 2-Ch Bridged Outputs 20 W × 2
- .
- 4-Ch Single-Ended Outputs 10 W × 4
- .
- 2-Ch Single-Ended + 1-Ch Bridged 2.1 10 W × 2 + 20 W
- .
- Closed Loop Power Stage Architecture
- .
- Improved PSRR Reduces Power Supply Performance Requirements
- .
- Higher Damping Factor Provides for Tighter, More Accurate Sound
With Improved Bass Response
- .
- Constant Output Power Over Variation in Supply
- .
- Wide PVCC Range From 10 V to 26 V
- .
- No Separate Supply Required for Gate Drive
- .
- Supports 32-kHz–192-kHz Sample Rates LJ/RJ/I2S
- .
- Headphone PWM Outputs
- .
- Subwoofer PWM Outputs
- .
- AM Interference Avoidance Support
- .
- Audio/PWM Processing
- .
- Independent Channel Volume Controls With 24-dB to
–100-dB Range—Soft Mute 50% Duty Cycle
- .
- Programmable Dynamic Range Control
- .
- 16 Programmable Biquads for Speaker Equalization
- .
- Adaptive Biquad Coefficients for EQ and DRC Filters
- .
- Programmable Input and Output Mixers
- .
- Loudness Compensation for Subwoofer
- .
- Automatic Sample-Rate Detection and Coefficient Banking
- .
- General Features
- .
- Serial Control Interface Operational Without MCLK
- .
- Factory-Trimmed Internal Oscillator Avoids the Need for External Crystal
- .
- Surface Mount, 64-Terminal, 10-mm × 10-mm HTQFP Package
- .
- Thermal and Short-Circuit Protection
All other trademarks are the property of their respective owners