MAX6767TALD2+
MAXIM INTEGRATED PRODUCTS MAX6767TALD2+ LDO Voltage Regulator, Adjustable, 4V to 72V input, 620mV drop., 0.1A out, TDFN-8 New
The is a low power, automotive micropower linear regulator with supervisor in 8 pin TDFN package. This low quiescent current, high voltage regulator operates from 4V to 72V and deliver up to 100mA of load current. It consumes only 31µA of quiescent current & makes it ideal for always-on automotive modules. The MAX6767TALD2+ is offered with fixed standard output of 5V or can be adjusted from 1.8V to 11V with two external resistors. Whenever regulator"s output falls below reset threshold, the active-low RESET output asserts and remains asserted for at least minimum reset timeout period after output voltage exceeds its threshold. It provides hold input active-low HOLD in addition to enable input to allow for implementation of self holding circuit without requiring external components. Setting active-low HOLD low after enabling regulator forces regulator to remain on even if ENABLE is subsequently set low. Releasing active-low HOLD shuts down regulator.
- .
- Dropout voltage of 620mV with 5V output at 100mA
- .
- Active-low reset timeout period of 12.5ms
- .
- Reset threshold voltage of 4.625V
- .
- Open-drain active-low reset output
- .
- Single enable inputs
- .
- Overtemperature and short circuit protection
- .
- Shutdown supply current of 3.3µA
- .
- SET threshold voltage of 1.233V at ILOAD = 1mA and SET input current of ±100nA
- .
- Line regulation of 1% 6.5V
- .
- Operating temperature range from -40°C to 125°C