TVP5150AM1ZQC

超低功耗NTSC / PAL / SECAM视频， REBUST同步检测器解码器 ULTRALOW POWER NTSC/PAL/SECAM VIDEO DECODER WITH REBUST SYNC DETECTOR

Description

The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features

• Accepts NTSC J, M, 4.43, PAL B, D, G, H, I, M, N, Nc, and SECAM B, D, G, K, K1, L Video

• Supports ITU-R BT.601 Standard Sampling

• High-Speed 9-Bit Analog-to-Digital Converter ADC

• Two Composite Inputs or One S-Video Input

• Fully Differential CMOS Analog Preprocessing

   Channels With Clamping and Automatic Gain

   Control AGC for Best Signal-to-Noise S/N Performance

• Ultralow Power Consumption

• 48-Terminal PBGA Package ZQC or 32-Terminal TQFP Package PBS

• Power-Down Mode: <1 mW

• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C

• Complementary 4-Line 3-H Delay Adaptive Comb Filters for Both Cross-Luminance and Cross-Chrominance Noise Reduction

• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals

• Single 14.31818-MHz Crystal for All Standards

• Internal Phase-Locked Loop PLL for Line-Locked Clock and Sampling

• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder

• 3.3-V Digital I/O Supply Voltage Range

• Standard Programmable Video Output Formats

   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs

   – 8-Bit 4:2:2 With Discrete Syncs

• Macrovision™ Copy Protection Detection

• Advanced Programmable Video Output Formats

   – 2× Oversampled Raw Vertical Blanking Interval VBI Data During Active Video

   – Sliced VBI Data During Horizontal Blanking or Active Video

• VBI Modes Supported

   – Teletext NABTS, WST

   – Closed-Caption Decode With FIFO and Extended Data Services XDS

   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code

   – Gemstar 1x/2x Electronic Program Guide Compatible Mode

   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data Signals

• Power-On Reset

• Industrial Temperature Range

TVP5150AM1I: –40°C to 85°C

• Qualified for Automotive Applications

   AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ