ICM-20608-G
IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm 16-pin LGA package
Description: The is the latest 6-axis device offered by TDK Invensense for the mass market. Compared to previous 6-axis devices, the ICM-20608 offers lower power consumption, lower noise, and a thinner package. The ICM-20608 offers a duty-cycled operation mode for the gyroscope, that reduces gyroscope power consumption by half or more depending on ODR compared to earlier 6-axis devices. It also provides about 20% lower noise than previous devices, and about 17% thinner package compared to previous devices. The ICM-20608 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small, 3 mm x 3 mm x0.75 mm 16-pin LGA package. It also features a 512-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data, entering into a low-power mode.