9L30050 008H100

Cable; 50Conductors; 30AWG; 7x38; TC; PVC ins; Gray Ribbon Cable; AWM

All flat cable types on this page are 28 AWG 7 × 36 stranded and feature 0.050" conductor spacing. PVC insulated, except where noted, and rated 300 V, 105°C.

.

* Voltage Rating:** 300 Vrms. ** Dielectric Withstanding Voltage:** 2000 Vrms. All will terminate to any standard IDC flat cable connector. See Product Index for complete selection. Passes VW-1 vertical wire flame test. UL recognized.

** Product Description**

Belden"s miniaturized 0.025" pitch extruded gray ribbon cable provides higher signal density, greater design flexibility, and an alternative to the expensive Teflon® transmission cables. The cable is manufactured to precise tolerances which allows for mass-termination to standard 0.050" contact IDC connectors while assuring consistent and reliable electrical characteristics. With the miniaturization of the interconnects, significant reduction in components can be achieved. The cable is constructed of stranded 30 AWG 7 × 38 tinned copper conductors. Insulation material consists of Gray PVC, with a Red polarity stripe for proper circuit alignment. Standard conductor counts are 26 and 50; other sizes are available upon request. The cable is UL approved and CSA certified, and passes the VW-1 Vertical Wire Flame Test.

** Color Code: ** Gray with Red polarity stripe.

** Application:** Internal interconnection or internal wiring of electronic equipment.