PCAL6416AHF,128

NXP  PCAL6416AHF,128  输入/输出扩展, 16bit, 400 kHz, I2C, 1.65 V, 5.5 V, HWQFN

The is a 16-bit I/O Expander provides remote I/O expansion for most microcontroller families via the I²C-bus interface. The I/O expander provides a simple solution when additional I/Os are needed while keeping interconnections to a minimum. In addition to providing a flexible set of GPIOs, it simplifies interconnection of a processor running at one voltage level to I/O devices operating at a different usually higher voltage level. The PCAL6416A has built-in level shifting feature that makes this device extremely flexible in mixed signal environments where communication between incompatible I/O voltages is required. Its wide VDD range of 1.65 to 5.5V on the dual power rail allows seamless communications with next-generation low voltage microprocessors and microcontrollers on the interface side SDA/SCL and peripherals at a higher voltage on the port side.

.

Low standby current consumption

.

Schmitt-trigger action allows slow input transition and better switching noise immunity

.

Open-drain active LOW interrupt output INT\

.

Internal power-ON reset

.

Power-up with all channels configured as inputs

.

No glitch on power-up

.

Latched outputs with 25mA drive maximum capability for directly driving LEDs

.

Latch-up performance exceeds 100 mA per JESD 78, class II

.

Bank selectable push-pull or open-drain output stages

.

Read-only register identifies the source of an interrupt

.

Input port register values changes are kept until the input port register is read

.

Floating input or pull-up/pull-down resistor enable

.

Mask prevents the generation of the interrupt when input changes state

.

100kR Pull-up/down resistor