MAX9291
3.12Gbps GMSL Serializer for Coax or STP Output and HDMI InputSerializer Enables Use of Coax Cables, Reducing Weight and Cost of Cabling in Automotive Infotainment
Description
The /MAX9293 GMSL serializers convert an HDMI input to a gigabit multimedia serial link GMSL output for transmission of video, audio, and control signals over 15m or more of 50Ω coax or 100Ω shielded twisted-pair STP cable. The MAX9293 has HDCP content protection, but is otherwise the same as the MAX9291. The serializer pairs with any GMSL deserializer capable of coax input. When programmed for STP output the serializer is backward compatible with any GMSL deserializer. The output amplitude is programmable 100mV to 500mV single-ended coax or 100mV to 400mV differential STP.
The audio channel supports L-PCM I²S stereo and up to eight channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits.
The embedded control channel operates at 9.6kbps to 1Mbps in UART-to-UART and UART-to-I²C modes, and up to 1Mbps in I²C-to-I²C mode. Using the control channel, a µC can program serializer, deserializer, and peripheral device registers at any time, independent of video timing and manage HDCP operation MAX9293. A GPO output supports touch-screen controller interrupt requests from the remote end of the link.
For use with longer cables, the serializers has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply is 1.8V and 3.3V and the I/O supply is 1.7V to 3.6V. The package is a leadPb-free, 56-pin, 8mm × 8mm TQFN/SWTQFN with exposed pad and 0.5mm lead pitch.