AD8114ASTZ
ANALOG DEVICES AD8114ASTZ 芯片, 交叉开关, 视频, 16X16, LQFP-100
Product Details
The AD8114/AD8115 are high speed, 16 × 16 video crosspoint switch matrices. They offer a −3 dB signal bandwidth greater than 200 MHz and channel switch times of less than 50 ns with 1% settling. With −70 dB of crosstalk and −98 dB isolation at 5 MHz, the AD8114/AD8115 are useful in many high speed applications.
The differential gain and differential phase of better than 0.05% and 0.05°, respectively, along with a 0.1 dB flatness out to 25 MHz while driving a 75 Ω back-terminated load, make the AD8114/ AD8115 ideal for all types of signal switching.
The AD8114/AD8115 include 16 independent output buffers that can be placed into a high impedance state for paralleling crosspoint outputs so that off channels do not load the output bus. The AD8114 has a gain of 1, while the AD8115 offers a gain of 2. They operate on voltage supplies of ±5 V while consuming only 70 mA of idle current. The channel switching is performed via a serial digital control which can accommodate daisy-chaining of several devices or via a parallel control, allowing updating of an individual output without reprogramming the entire array.
The AD8114/AD8115 is packaged in a 100-lead LQFP and is available over the extended industrial temperature range of −40°C to +85°C.
Applications
- .
- Routing of high speed signals, including
– Video NTSC, PAL, S, SECAM, YUV, RGB
– Compressed video MPEG, wavelet
– 3-level digital video HDB3
– Data communications
– Telecommunications
### Features and Benefits
- .
- 16 × 16 high speed nonblocking switch arrays: G = 1
- .
- Serial or parallel programming of switch array
- .
- Serial data out allows daisy-chaining of multiple 16 × 16 arrays to create larger switch arrays
- .
- High impedance output disable allows connection of
- .
- multiple devices without loading the output bus
- .
- For smaller arrays see the AD8108/AD8109 8 × 8 or AD8110/AD8111 16 × 8 switch arrays
- .
- Complete solution
- .
- Buffered inputs
- .
- Programmable high impedance outputs
- .
- 16 output amplifiers G = 1
- .
- Drives 150 Ω loads
- .
- Excellent video performance
- .
- 25 MHz, 0.1 dB gain flatness
- .
- 0.05%/0.05° differential gain/differential phase error RL = 150 Ω
- .
- Excellent ac performance
- .
- −3 dB bandwidth: 225 MHz
- .
- Slew rate: 375 V/µs
- .
- Low power of 700 mW 2.75 mW per point
- .
- Low all hostile crosstalk of −70 dB at 5 MHz
- .
- Reset pin allows disabling of all outputs connected through a capacitor to ground provides power-on reset capability
- .
- 100-lead LQFP 14 mm × 14 mm