SE98ATP,147
DDR memory module temp sensor, 1.7V to 3.6V
Overview
The Semiconductors SE98A measures temperature from -40 ºC and +125 ºC with JEDEC Grade B ±1 ºC accuracy between +75 ºC and +95 ºC communicating via the I2C-bus/SMBus. It is typically mounted on a Dual In-Line Memory Module DIMM measuring the DRAM temperature in accordance with the new JEDEC JC-42.4 Mobile _Platform Memory Module Thermal Sensor Component_specification.
The SE98A thermal sensor operates over the VDD range of 1.7 V to 3.6 V. The SE98A does not include the 2 k SPD and is designed for custom DIMM where larger SPD is required.
The Temp Sensor TS consists of an Analog-to-Digital Converter ADC that monitors and updates its own temperature readings 8 times per second, converts the reading to a digital data, and latches them into the data temperature registers. User-programmable registers, such as Shutdown or Low-power modes and the specification of temperature event and critical output boundaries, provide flexibility for DIMM temperature-sensing applications.
When the temperature changes beyond the specified boundary limits, the SE98A outputs an EVENT signal using an open-drain output that can be pulled up between 0.9 V and 3.6 V. The user has the option of setting the EVENT output signal polarity as either an active LOW or active HIGH comparator output for thermostat operation, or as a temperature event interrupt output for microprocessor-based systems. The EVENT output can even be configured as a critical temperature output.
The SE98A supports the industry-standard 2-wire I²C-bus/SMBus serial interface. The SMBus TIMEOUT function is supported to prevent system lock-ups. Manufacturer and Device ID registers provide the ability to confirm the identify of the device. Three address pins allow up to eight devices to be controlled on a single bus.
The SE98A is an improved SE98 and is comparable to the thermal sensor in the SE97 but with voltage range of 1.7 V to 3.6 V.
MoreLess
## Features
* JEDEC JC-42.4 TS3000B1 DIMM 0.5 ºC typ. between 75 ºC and 95 ºC temperature sensor
* Optimized for voltage range: 1.7 V to 3.6 V
* Shutdown current: 0.1 µA typ. and 5.0 µA max.
* 2-wire interface: I2C-bus/SMBus compatible, 0 Hz to 400 kHz
* SMBus ALERT and TIMEOUT programmable
* 11-bit ADC Temperature-to-Digital converter with 0.125 ºC resolution
* Operating current: 250 µA typ. and 400 µA max.
* Programmable hysteresis threshold: 0 ºC, 1.5 ºC, 3 ºC, 6 ºC
* Over/under/critical temperature EVENT output
* B grade accuracy:
* ±0.5 ºC/±1 ºC typ./max. » +75 ºC to +95 ºC
* ±1 ºC/±2 ºC typ./max. » +40 ºC to +125 ºC
* ±2 ºC/±3 ºC typ./max. » -40 ºC to +125 ºC
* ESD protection exceeds 2000 V HBM per JESD22-A114, 250 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
* Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
* Available packages: TSSOP8, HWSON8 PSON8 VCED-3 and HXSON8
## Target Applications
* DDR2 and DDR3 memory modules
* Laptops, personal computers and servers
* Enterprise networking
* Hard disk drives and other PC peripherals
## Features
