JTL6024S12

直流/直流转换器 隔离式板载, 1输出, 60 W, 12 VDC, 5 A

The from is a JTL60 series 60W single output DC to DC converter. It has wide 4:1 input range and 2inch x 1inch footprint. The converter features line regulation of ±0.5%, load regulation of 0.5% from 0% to full load and cross regulation of ±5%. The DC to DC converter has 140% overload protection and continuous hicc-up mode short circuit protection with auto recovery and overvoltage protection. The input to output isolation of 1600VDC, isolation resistance of 10^9ohm and isolation capacitance of 2200pF.

.

Input voltage range from 9V to 36V 24V nominal input voltage

.

Output voltage of 12V and output current of 5A

.

Input current of 25mA at no load and 2705mA at full load

.

15V OVP setting and 225KHz switching frequency

.

Efficiency of 92% and maximum capacitive load of 5850µF

.

±10% output trim and initial set accuracy of ±1% at full load

.

Full load at 50°C ambient and remote on/off

.

Start-up time of 60ms and ripple & noise of 100mV pk-pk

.

Dimension is 2inch x 1inch x 0.45inch 50.8mm x 25.4mm x 11.5mm and weight is 45g

.

Operating temperature range from -40°C to 85°C