410-155

Evaluation Board, Spartan-3E, FPGA, 100K Gate, Spartan, PS/2Port and 8Bit VGA Port

The is a Basys2 board that is a circuit design and implementation platform that anyone can use to gain experience building real digital circuits. Built around a Xilinx Spartan-3E field programmable gate array and a Atmel AT90USB2 USB controller. The Basys2 board provides complete, ready to use hardware suitable for hosting circuits ranging from basic logic devices to complex controllers. A large collection of on board I/O devices and all required FPGA support circuits are included, so countless designs can be created without the need for any other components. Four standard expansion connectors allow designs to grow beyond the Basys2 board using breadboards, user designed circuit boards or Pmods. The Basys2 board can draw power and be programmed via its on board USB2 port. PC based Adept software automatically detects the Basys2 board, provides a programming interface for the FPGA and platform flash ROM and allows user data transfers.

.

Xilinx platform flash ROM to store FPGA configurations

.

8 LEDs, 4 digit 7 seg display, 4 buttons, 8 slide switches

.

PS/2 port and 8bit VGA port

.

User settable clock 25MHz/50MHz/100MHz, plus socket for second clock

.

Four 6 pin header expansion connectors

.

ESD and short circuit protection on all I/O signals

.

Designed to work with the free ISE WebPack CAD software

Voltages higher than 5.5V on either power connector may cause permanent damage to the board.