TLV320AIC1110GQER
PCM编解码器 PCM CODEC
DESCRIPON
The TLV320AIC1110 provides extended gain and attenuation flexibility for transmit, receive, and sidetone
paths. A differential earphone output is capable of driving speaker loads as low as 8 Ωfor use in speaker
phone applications. The single tone function on the TLV320AIC1110 generates a single tone output of up to 8 kHz. The resolution of the DTMF tone is also selectable to 7.8125 Hz, 15.625 Hz, or 31.25 Hz through the interface control. The analog switch provides more control capabilities for voice-band audio processor PCM codec.
FEATURES
2.7-V to 3.3-V Operation
Designed for Analog and Digital Wireless Handsets and Telecommunications Applications
Two Differential Microphone Inputs
Differential Earphone Outputs and One Single-Ended Earphone Output
Earphone and Microphone Mute
Programmable Transmit, Receive, and Sidetone Paths With Extended Gain and Attenuation Ranges
Programmable for 15-Bit Linear Data or 8-Bit
Companded µ-law and A-law Mode
Supports PCM Clock Rates of 128 kHz and 2.048 MHz
Pulse Density Modulated PDM Buzzer Output
On-Chip I2C Bus, Which Provides Simple, Standard, Two-Wire Serial Interface With Digital ICs
Dual-Tone Multifrequency DTMF and Single-Tone Generator Capable of up to 8-kHz Tone With Three Selectable Resolutions of 7.8125 Hz, 15.625 Hz, and 31.25 Hz
2-Channel Auxiliary Multiplexer MUX Analog Switch
Capable of Driving 32 ΩDown to a 8-Ω Speaker
Programmable Power Down Modes
Pin Compatible to the TLV320AIC1103 and TLV320AIC1109 Devices for TQFP Only
Available in a 32-Pin Thin Quad Flatpack TQFP Package and MicroStar Junior BGA
APPLICATIONS
Digital Handset
Digital Headset
Cordless Phones
Digital PABX
Digital Voice Recording