TFP410

165MHz PanelBus™ TMDS DVI 发送器/串行器

The device is a Texas Instruments PanelBus™ flat-panel display product, part of a comprehensive family of end-to-end DVI 1.0-compliant solutions, targeted at the PC and consumer electronics industry.

The TFP410 device provides a universal interface to allow a glueless connection to most commonly available graphics controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports flat-panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.

The TFP410 device combines PanelBus circuit innovation with ’s advanced 0.18 µm EPIC-5 CMOS process technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP package providing a reliable, low-current, low-noise, high-speed digital interface solution.

.

Digital Visual Interface DVI Compliant1

.

Supports Pixel Rates up to 165 MHz Including 1080 p and

WUXGA at 60 Hz

.

Universal Graphics Controller Interface

.

12-Bit, Dual-Edge and 24-Bit, Single-Edge Input Modes

.

Adjustable 1.1 V to 1.8 V and Standard 3.3 V CMOS Input

Signal Levels

.

Fully Differential and Single-Ended Input Clocking Modes

.

Standard Intel 12-Bit Digital Video Port Compatible as

on Intel™ 81x Chipsets

.

Enhanced PLL Noise Immunity

.

On-Chip Regulators and Bypass Capacitors for Reducing

System Costs

.

Enhanced Jitter Performance

.

No HSYNC Jitter Anomaly

.

Negligible Data-Dependent Jitter

.

Programmable Using I2C Serial Interface

.

Monitor Detection Through Hot-Plug and Receiver Detection

.

Single 3.3-V Supply Operation

.

64-Pin TQFP Using TI’s PowerPAD™ Package

.

TI’s Advanced 0.18-µm EPIC-5™ CMOS Process Technology

.

Pin Compatible With SiI164 DVI Transmitter