MX-500S

MX-500S 焊接/再加工系统MX-500 焊接和再加工系统利用 SmartHeat® 技术，每个墨盒配有自调加热器，可“感应”其自身温度，并在加热器烙铁头寿命内密切保持其预设闲置温度。MX-500S 焊接/再加工系统 借助 SmartHeat® 技术实现更强的加工控制 集成电源指示表 用户可编程省电模式 接地故障中断 通用电源 与所有 MX 产品兼容 ### 注**请注意，此焊接台不包括焊锡丝。 为何不尝试 RS 品牌焊丝？** 756-8884### 随附电源、MX-RM3E 焊接和再加工手柄和 WS1 睡眠工作台### Metcal 再加工

The is a Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon. The system utilizes SmartHeat® technology, wherein each cartridge is equipped with a self-regulating heater which senses its own temperature and closely maintains its pre-set idle temperature for the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the heater, no external adjustment or equipment is required. The MX-500 retains switchable dual port, 40W operation while introducing numerous new features in a new housing. A built -in net power meter which will display a graphical and numerical representation of the power applied to the cartridge. The time to enter PowerSave mode is adjustable from 10 to 120 minutes. The AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.

.

Integrated power indication meter

.

User programmable PowerSave mode

.

Ground fault interrupt

.

Universal power supply

.

Greater process control with SmartHeat® technology

.

Reduced space requirements