PD-AS-701/12

Ethernet Modules

This Part is EOL 

"s PD-AS-701 High-Power active splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by PoE+  switches and midspans. The High Power splitter can power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points, Thin-Clients, Video-Phones, PTZ Pan/Tilt/Zoom IP Cameras and more.

##### High Power Splitter Solution

Many contemporary terminals are designed and deployed without the ability to accept power via their LAN input. Such devices can only accept power through their DC jack while their RJ45 input accepts only data. Moreover, such devices might only accept voltage levels lower than the PoE standard minimum voltage 44v in IEEE802.3af or 50v in 802.3at. Using the PD-AS-701 high power splitter, these terminals immediately become PoE-ready without any modification required on their side.The splitter is identified as a powered device PD in front of the powering Midspan and after being detected and powered, it physically splits the data and power streams, arriving over a single cable, into two separate cords LAN & DC which go directly to the data terminal. Voltage regulation is also performed to the 12V level required by the terminal.