BQ77PL157APW-4225
Texas Instruments锂离子电池保护 IC 可检测各种故障条件,如过压、欠压、放电过电流和短路。 需要在没有监控器时提供独立保护或补充安全。### 电池管理,Texas Instruments
锂离子电池保护,Texas Instruments
锂离子电池保护 IC 可检测各种故障条件,如过压、欠压、放电过电流和短路。 需要在没有监控器时提供独立保护或补充安全。
### 电池管理,Texas Instruments
得捷:
IC BATT PROT LI-ION 3-6C 16TSSOP
立创商城:
BQ77PL157APW-4225
德州仪器TI:
Voltage Protection for 3 to 6 Series Cell Lithium-Ion/Polymer Batteries
欧时:
Texas Instruments BQ77PL157APW-4225 电池充电控制器, 4.2 → 30 V电源, 16引脚 TSSOP封装
贸泽:
电池管理 Vlt Prot for 3-6 Ser Cell Li-Ion/Pol Batt
艾睿:
Easily optimize battery performance with this BQ77PL157APW-4225 charge controller from Texas Instruments. With an output that has a voltage of 4.225 V, this is power management at its best. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This device runs on Li-Ion|Li-Pol. This battery gauge has a minimum operating temperature of -40 °C and a maximum of 110 °C. This device has a minimum operating supply voltage of 4.2 V and a maximum of 30 V.
Chip1Stop:
Lithium Ion Protection Voltage Protection for 3 to 6 Series Cell Lithium-Ion/Polymer Batteries Li-Ion/Li-Pol 4.225V 16-Pin TSSOP Tube
Verical:
Battery Protection Li-Ion/Li-Pol 4.225V Automotive 16-Pin TSSOP Tube