LT6016HMS8#PBF
运算放大器, 轨至轨输入, 2个放大器, 3.3 MHz, 0.8 V/µs, 3V 至 50V, MSOP, 8 引脚
The from is a 3.2MHz, 0.8V/µs low power, Over-The-Top® precision operational amplifier in 8 lead plastic MSOP package. This is dual rail-to rail input Op-amp with input offset voltage trimmed to less than 50µV. It operates on single and split supplies with a total voltage of 3V to 50V and draw only 315µA per amplifier. It is reverse battery protected, drawing very little current for reverse supplies up to 50V. The Over-The-Top® input stage of the LT6016 is designed to provide added protection in tough environments. The input common mode range extends from V- to V+ and beyond, this amplifier operates with inputs up to 76V above V- independent of V+. It can drive loads up to 25mA and are unity-gain stable with capacitive loads as large as 200pF. It is used in high side or low side current sensing, battery/power supply monitoring, 4mA to 20mA transmitters, high voltage data acquisition.
- .
- 0.75µV/°C input offset voltage drift at TA = 25°C
- .
- 0.75µV/Mo long term voltage offset stability at TA = 25°C
- .
- 126db input common mode rejection ratio
- .
- 126db supply rejection ratio and 3000V/mV open loop gain
- .
- ±2nA input bias current and input offset current at TA = 25°C, 0.25V < VCM < V+ - 1.75V
- .
- Gain bandwidth product of 3.2MHz, 0.75V/µs slew rate at TA = 25°C
- .
- Specified on 5V and ±15V supplies, 315µA supply current per amplifier at TA = 25°C
- .
- No supply sequencing problems, no phase reversal
- .
- Operating temperature range from -40°C to 125°C
- .
- Rail to rail input and output, low power of 315µA/amplifier