LC72717PW-H

FM Demodulator 3.3V Automotive 64Pin SQFP Tray

The LC72717PW is a data demodulation LSI for receiving FM multiplex broadcasts for mobile reception in the DARC format. This LSI includes an on-chip bandpass filter for extracting the DARC signal from the FM baseband signal. It also supports ITU-R recommended FM multiplex frame structures methods A, A’, B, and C and can implement a compact, multifunction DARC reception system. The LC72717PW’s package, pin assignment and electrical characteristics are same as the LC72715PW VICS-LSI. Functionally, the LC72717PW is a product that VICS function is removed from the LC72715PW. The LC72717PW is also control-compatible with the LC72711LW. Note that a contract with the NHK Engineering System, Inc. may be required to produce DARC compatible products in case, please contact with the NHK Engineering System, Inc.

Features

---

 |

.

Adjustment-free 76 kHz SCF bandpass filter

.

Supports all FM multiplex frame structures under CPU control.

.

MSK delay detection system based on a 1T delay.

.

Error correction function based on a 2T delay in the MSK detection stage

.

Digital PLL based clock regeneration function

.

Shift-register 1T and 2T delay circuits

.

Block and frame synchronization detection circuits

.

Functions for setting the number of allowable BIC errors and the number of synchronization protection operations.

.

Error correction using 272, 190 codes

.

Built-in layer 4 CRC code checking circuit

.

On-chip frame memory and memory control circuit for vertical correction

.

7.2 MHz crystal oscillator circuit

.

Two power saving modes : STNBY and EC STOP

.

Applications can use either a parallel CPU interface DMA or a CCB serial interface.

.

Supply voltage : 2.7 V to 3.6 V