MAX3089EESD+T

MAXIM INTEGRATED PRODUCTS  MAX3089EESD+T  芯片, RS422/RS485 收发器, 10MBPS, 5.25V, NSOIC

The is a ±15KVESD protected, fail-safe, high speed RS485/RS422 transceiver in 14 pin NSOIC package. It contains one driver and one receiver. The device features fail-safe circuitry which has a logic high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be logic high if all transmitters on a terminated bus are disabled high impedance. MAX3089EESD+T slew rate is selectable between 115Kbps, 500Kbps and 10Mbps by driving a selector pin with a single three-state driver. The transmitter output and receiver input is protected by ±15KV using human body model with enhanced ESD protection. This transceiver typically draws 375µA of supply current when unloaded or when fully loaded with the drivers disabled. It has a 1/8 unit load receiver input impedance that allows up to 256 transceivers on the bus.

.

Supply voltage range from 4.75V to 5.25V

.

Operating temperature range from -40°C to 85°C

.

Selectable between half duplex and full duplex operation

.

True fail-safe receiver while maintaining EIA/TIA485 compatibility

.

1nA low current shutdown mode

.

Features receiver/driver enable function

.

Phase controls to correct for twisted pair reversal