STK672-740A-E
IC MOTOR DRIVER PAR 19SIP
Overview
The is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.
Features
• Built-in overcurrent detection function output current OFF.
• Built-in overheat detection function output current OFF.
• If either overcurrent or overheat detection function is activated, the FAULT signal active low is output.
• Built-in power on reset function.
• Phase signal input driver activated with an active Low and incorporates a simultaneous ON prevention function.
• Supports schmitt input for 2.5V high level input.
• Incorporating a current detection resistor 0.089Ω: resistor tolerance ±2%, motor current can be set using two external resistors.
• Provides the output current cutoff ENABLE pin.
Applications
• Office photocopiers, printers, etc.