EB061

MATRIX EB061 Application Board, E-BLOCKS, ECIO ARM Firmware Recovery TST Jumper, PICKit ICSP Interface

The ECIO application board adds E-blocks compatibility to the ECIO 28pin and 40pin devices. The application board provides up to five E-blocks ports which allows you to attach a wide range of E-blocks boards from simple LED and switch boards through to Bluetooth, IrDA and Internet communications boards. The circuit board consists of a means of connecting E-blocks to an ECIO module. The circuit board also allows for a regulated external power supply to be connected as a means of powering the ECIO. The bridge rectifier allows for either polarity to be input from the external power supply. There is also a PICkit compatible ICSP header which allows for the ECIO to be fully reprogrammed.

.

E-blocks compatible ports

.

External power supply input

.

Voltage regulator

.

PICkit ICSP interface

.

ECIO ARM firmware recovery TST jumper

.

Adaptor for E-blocks

.

5 x E-blocks ports

If the ICSP connector is used to program the ECIO then the bootloader onboard the ECIO may be corrupted or overwritten.