INA139
36V、高侧、高速、电流输出电流分流监控器
The and INA169 are high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, high-speed, low quiescent current, and tiny SOT-23 packaging enable use in a variety of applications.
Input common-mode and power-supply voltages are independent and can range from 2.7 V to 40 V for the INA139 and 2.7 V to 60 V for the INA169. Quiescent current is only 60 µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error.
The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.
Both the INA139 and INA169 are available in 5-pin SOT-23 packages, and are specified for the –40°C to 85°C temperature range.
- .
- Complete Unipolar High-side Current
Measurement Circuit
- .
- Wide Supply and Common-Mode Range
- .
- INA139: 2.7 V to 40 V
- .
- INA169: 2.7 V to 60 V
- .
- Independent Supply and Input Common-Mode
Voltages
- .
- Single Resistor Gain Set
- .
- Low Quiescent Current: 60 µA Typical
- .
- 5-Pin, SOT-23 Packages