AD8230YRZ-REEL7

16 V轨到轨，零漂移精密仪表放大器 16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier

Product Details

The AD8230 is a low drift, differential sampling, precision instrumentation amplifier. Auto-zeroing reduces offset voltage drift to less than 50 nV/°C. The AD8230 is well-suited for thermocouple and bridge transducer applications. The AD8230’s high CMR of 110 dB minimum rejects line noise in measurements where the sensor is far from the instrumentation. The 16 V rail-to-rail, common-mode input range is useful for noisy environments where ground potentials vary by several volts. Low frequency noise is kept to a minimal 3 μV p-p, making the AD8230 perfect for applications requiring the utmost dc precision. Moreover, the AD8230 maintains its high performance over the extended industrial temperature range of −40°C to +125°C.

Two external resistors are used to program the gain. By using matched external resistors, the gain stability of the AD8230 is much higher than instrumentation amplifiers that use a single resistor to set the gain. In addition to allowing users to program the gain between 101 and 1000, users can adjust the output offset voltage.

The AD8230 is versatile yet simple to use. Its auto-zeroing topology significantly minimizes the input and output transients typical of commutating or chopper instrumentation amplifiers. The AD8230 operates on ±4 V to ±8 V +8 V to +16 V supplies and is available in an 8-lead SOIC.

**Applications**

* Pressure measurements

* Temperature measurements

* Strain measurements

* Automotive diagnostics

Data Sheet, Rev. B, 9/07

### Features and Benefits

.

Resistor programmable gain range: 101 to 1000

.

Supply voltage range: ±4 V to ±8 V

.

Rail-to-rail input and output

.

Maintains performance over −40°C to +125°C

.

Excellent ac and dc performance

110 dB minimum CMR @ 60 Hz, G = 10 to 1000

10 μV maximum offset voltage RTI, ±5 V operation

50 nV/°C maximum offset drift

20 ppm maximum gain nonlinearity