ADM3065EARMZ
3V to 5.5V, ±12kV IEC ESD Protected, 50Mbps RS-485 Transceiver
Product Details
The ADM3065E is a 3.0 V to 5.5 V, IEC electrostatic discharge ESD protected RS-485 transceiver, allowing the device to withstand ±12 kV contact discharges on the transceiver bus pins without latch-up or damage. The ADM3066E features a VIO logic supply pin allowing a flexible digital interface capable of operating as low as 1.62 V.
The ADM3065E/ADM3066E are suitable for high speed, 50 Mbps, bidirectional data communication on multipoint bus transmission lines. The ADM3065E/ADM3066E feature a ¼ unit load input impedance, which allows up to 128 transceivers on a bus.
The ADM3065E/ADM3066E are half-duplex RS-485 transceivers, fully compliant to the Profibus® standard with increased 2.1 V bus differential voltage at VCC ≥ 4.5 V.
The RS-485 transceivers are available in a number of space-saving packages, such as a 10-lead, 3 mm × 3 mm LFCSP package, an 8-lead, 3 mm × 3 mm MSOP package, a 10-lead, 3 mm × 3 mm MSOP package, and an 8-lead, narrow body SOIC package. Models with operating temperature ranges of −40°C to +125°C and −40°C to +85°C are available.
Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. If, during fault conditions, a significant temperature increase is detected in the internal driver circuitry, this feature forces the driver output into a high impedance state.
The ADM3065E/ADM3066E guarantee a logic high receiver output when the receiver inputs are shorted, open, or connected to a terminated transmission line with all drivers disabled.
**Applications**
- .
- Industrial fieldbuses
- .
- Process control
- .
- Building automation
- .
- Profibus networks
- .
- Motor control servo drives and encoders
### Features and Benefits
- .
- TIA/EIA RS-485 compliant over full supply range
- .
- 3.0 V to 5.5 V operating voltage range on VCC
- .
- ESD protection on the bus pins
- .
- IEC 61000-4-2 ≥ ±12 kV contact discharge
- .
- IEC 61000-4-2 ≥ ±12 kV air discharge
- .
- HBM ≥ ±30 kV
- .
- Full hot swap support glitch free power-up/power-down
- .
- High speed 50 Mbps data rate
- .
- Full receiver short circuit, open circuit, and bus idle failsafe
- .
- Extended temperature range up to 125°C
- .
- Profibus compliant at VCC ≥ 4.5 V
- .
- Half-duplex
- .
- Allows connection of up to 128 nodes onto the bus
- .
- Space-saving package options
- .
- 10-lead 3 mm × 3 mm LFCSP package
- .
- 8-lead and 10-lead MSOP packages
