LM2937IMP-5.0
TEXAS INSTRUMENTS LM2937IMP-5.0. 固定电压稳压器, LDO, 0V至26V, 500mV压差, 5V输出, 500mA输出, SOT-223-3
The is a fixed output low dropout LDO linear voltage regulator in 4 pin SOT-223 package. The use of PNP power transistor provides low dropout voltage characteristics. Minimum input to output voltage differential required for output to remain in regulation is typically 0.5V 1V ensured maximum over full operating temperature range with a load current of 500mA. Special circuitry has been incorporated to minimize quiescent current to 10mA with full 500mA load current when input to output voltage differential is greater than 3V. The LM2937 requires an output bypass capacitor for stability. As with most low dropout regulators the ESR of this capacitor remains a critical design parameter. It includes special compensation circuitry that relaxes ESR requirements.
- .
- Fixed output voltage is 5V
- .
- Input voltage range from 0V to 26V
- .
- Output current in excess of 500mA
- .
- Output trimmed for 5% tolerance under all operating conditions
- .
- Dropout voltage is typically 0.5V at full rated load current
- .
- Wide output capacitor ESR range up to 3ohm
- .
- Operating temperature range -40°C to 85°C
- .
- Internal short circuit and thermal overload protection
- .
- Reverse battery and mirror image insertion protection
- .
- 60V input transient protection
This device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to MOS gates.