TLC1543

10 位，38kSPS ADC 串行输出，片上系统时钟，11 通道

The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, C, TLC1543I, and TLC1543Q are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select CS, input-output clock I/O CLOCK, address input ADDRESS, and data output DATA OUT] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion EOC output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.

.

10-Bit Resolution A/D Converter

.

11 Analog Input Channels

.

Three Built-In Self-Test Modes

.

Inherent Sample-and-Hold Function

.

Total Unadjusted Error. . .±1 LSB Max

.

On-Chip System Clock

.

End-of-Conversion EOC Output

.

Terminal Compatible With TLC542

.

CMOS Technology