SPUJ193900

Alps Push Switches - SPUJ & SPUN SeriesFrom Alps, this **SPUJ** and **SPUN** series of Push Switches are non-shorting, horizontal mounted, signal switches suitable for through hole PCB mounting. With a choice of straight or formed snap-in pins, these Push Switches are also available in momentary non-lock or latching self-lock action, with two and four pole contact configurations, various switching travel and operating forces. The **SPUJ** series have a 2mm travel while the **SPUN** Push Switches have 2.5mm switch travel. They are rated to 0.1A at 30V dc and 50μA at 3V dc with a 20mΩ contact resistance, 100MΩ minimum insulation resistance and 500V ac withstand voltage for one minute.**Available in this Series:** • Stock number 758-2114 is a 2 pole Momentary Straight switch • Stock number 758-2111 is a 2 pole Latching Straight switch • Stock number 758-2118 is a 4 pole Latching Straight switch • Stock number 758-2127 is a 4 pole Latching Snap-in switch • Stock number 758-2095 is a 2 pole Momentary Straight switch • Stock number 758-2105 is a 2 pole Momentary Snap-in switch • Stock number 758-2098 is a 2 pole Latching Straight switch • Stock number 758-2091 is 2 pole Latching Snap-in switch • Stock number 758-2108 is a 4 pole Latching Straight switch • Stock number 758-2102 is a 4 pole Latching Snap-in switch • SPUJ 2 pole = 25mm overall depth, 8.8mm height, 7.5mm width • SPUJ 4 pole = 32.5mm overall depth, 8.8mm height, 7.5mm width • SPUN 2 pole = 42mm overall depth, 13mm height, 10mm width • SPUN 4 pole = 54mm overall depth, 13mm height, 10mm width ### Dimensions:### Alps 按钮开关

The is a 2mm 4-pole PCB Travel Horizontal Pushbutton Switch with non shorting changeover timing. This SPUJ series switch supports latching operation and snap-in terminal type. 5mm in lever height from the mounting surface of a PC board. Standard knobs are available. Suitable for multiple circuits.

.

2.3 ±1N Operating force

.

20mR/40mR Maximum contact resistance initial performance/after lifetime

.

3mm Total travel