AD584JNZ

Analog Devices### 电压参考，Analog Devices精密固定和可调电压参考 IC 利用串联、并联或串联/并联拓扑，并提供通孔和表面安装封装。 电压参考的初始准确度为 ±0.02 至 ±2%。

参考电压，可调，Analog Devices

### 电压参考，Analog Devices

精密固定和可调电压参考 IC 利用串联、并联或串联/并联拓扑，并提供通孔和表面安装封装。 电压参考的初始准确度为 ±0.02 至 ±2%。

欧时:
参考电压，可调，Analog Devices### 电压参考，Analog Devices精密固定和可调电压参考 IC 利用串联、并联或串联/并联拓扑，并提供通孔和表面安装封装。 电压参考的初始准确度为 ±0.02 至 ±2%。

得捷:
IC VREF SERIES 0.3% 8DIP

立创商城:
串联 10mA

艾睿:
V-Ref Programmable 2.5V/5V/7.5V/10V 10mA 8-Pin PDIP N Tube

Jameco:
Voltage Reference Programmable 2.5 Volt 5 Volt 7.5 Volt 10 Volt 10 mA 8-Pin PDIP

安富利:
The AD584 is an 8-terminal precision voltage reference offering pin programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below, or between the four standard outputs, are available by the addition of external resistors. The input voltage can vary between 4.5 V and 30 V. Laser wafer trimming LWT is used to adjust the pin programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form. In addition to the programmable output voltages, the AD584 offers a unique strobe terminal that permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low power signal. In the off state, the current drained by the AD584 is reduced to approximately 100 µA. In the on state, the total supply current is typically 750 µA, including the output buffer amplifier. The AD584 is recommended for use as a reference for 8-, 10-, or 12-bit digital-to-analog converters DACs that require an external precision reference. In addition, the device is ideal for analog-to-digital converters ADCs of up to 14-bit accuracy, either successive approximation or integrating designs, and in general, it can offer better performance than that provided by standard self-contained references. The AD584J and AD584K are specified for operation from 0°C to +70°C, and the AD584S and AD584T are specified for the −55°C to +125°C range. All grades are packaged in a hermetically sealed, eight-terminal TO-99 metal can, and the AD584J and AD584K are also available in an 8-lead PDIP.

Chip1Stop:
10.000 V, 7.500 V, 5.000 V and 2.500 V, Pin Programmable Precision Voltage Reference V-Ref Programmable 2.5V/5V/7.5V/10V 10mA 8-Pin PDIP N Tube

Verical:
V-Ref Programmable 2.5V/5V/7.5V/10V 10mA 8-Pin PDIP N Tube

Newark:
# ANALOG DEVICES  AD584JNZ  Voltage Reference, Precision, Series - Programmable, AD584 Series, 2.5V, 5V, 7.5V, 10V, DIP-8

罗切斯特:
AD584 - Three Terminal Voltage Reference, 3 Output, 10V, Trim/Adjustable, BIPolar, PDIP8

DeviceMart:
IC VREF SERIES PREC ADJ 8-PDIP

Win Source:
IC VREF SERIES PROG 8DIP