AZM170-02ZRK-24VAC/DC

SCHMERSAL  AZM170-02ZRK-24VAC/DC  限位开关, 230 V, 4 A, 24 V

The is a Safety Interlock Switch with screw terminals for fast installation, 2NC contacts and IDC method of termination. The AZM170 series switch is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key guard position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid latching mechanism. Both the safety switch and solenoid mechanism feature positive break contacts.

.

Compact design

.

Highly tamper-resistant

.

Two key entry locations

.

Rugged, corrosion-resistant and high-impact GRP housing

.

Built-in manual unlatching release

.

Interlock with protection against incorrect locking

.

High holding force

.

Meets IP67 wash down requirements