ADM2209EARU

EMI降低/ EMC兼容+ -15千伏ESD保护，双路RS - 232端口与待机 EMI-/EMC-Compliant +-15 kV ESD Protected, Dual RS-232 Port with Standby

Product Details

The ADM2209E is a complete, dual RS-232 port on a single chip, containing six drivers and ten receivers, and fully meeting EIA-232 and V.28 specifications. The device features an on-board dc-to-dc converter to generate a -12V power rail, eliminating the need for a negative power supply.

The ADM2209E is suitable for operation in harsh electrical environments and is compliant with the EU directive on EMC 89/336/EEC. Both the level of emissions and immunity are in compliance. EM immunity includes ESD protection in excess of ±15 kV on all I-O lines 1000-4-2, Electrical Fast Transient protection 1000-4-4 and Radiated Immunity 1000-4-3. EM emissions include radiated and conducted emissions as required by Information Technology Equipment EN55022, CISPR22.

The ADM2209E conforms to the EIA-232E and CCITT V.28 specifications and operates at data rates up to 460 kbps. In standby mode, one receiver on each port R5 remains active to allow monitoring of peripheral devices while the rest of the system is in power-saving mode. This feature allows the ADM2209E to wake up the system when a peripheral device begins communication.

The ADM2209E is available in a 38-lead TSSOP package.

### Features and Benefits

.

Two Complete Serial Ports, Six Drivers and Ten Receivers

.

Operates with 3 V or 5 V Logic

.

Low Power CMOS: 

<5 mA Operation

.

Low Standby Current: 100 mA

.

460 kbit/s Data Rate Guaranteed Laplink®-Compatible

.

0.1 mF Charge Pump Capacitors

.

Single +12 V Power Supply

.

+3.3 V/+5 V Standby Supply

.

One Receiver on Each Port Active in Standby

.

Complies with 89/336/EEC EMC Directive

.

ESD Protection to IEC1000-4-2 801.2

.

See datasheet for additional features