SG1526J-883B
Voltage Mode PWM Controller 100mA 350kHz 18Pin CDIP
The SG1526 is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. Included in an 18-pin dual-in-line package are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and steering logic, and two low impedance power drivers. Also included are protective features such as soft-start and under-voltage lockout, digital current limiting, double pulse inhibit, a data latch for single pulse metering, adjustable dead-time, and provision for symmetry correction inputs. For ease of interface, all digital control ports are TTL and B-series CMOS compatible. Active LOW logic design allows wired-OR connections for maximum flexibility. This versatile device can be used to implement single-ended or push-pull switching regulators of either polarity, both transformer-less and transformer coupled. The SG1526 is characterized for operation over the full military ambient junction temperature range of -55°C to +150°C. The SG2526 is characterized for operation from -25°C to +150°C, and the SG3526 is characterized for operation from 0°C to +125°C.
**
Features- .
- *
- .
- 8 to 35 volt operation
- .
- 5V reference trimmed to ±1%
- .
- 1Hz to 350KHz oscillator range
- .
- Dual 100mA source/sink outputs
- .
- Digital current limiting
- .
- Double pulse suppression
- .
- Programmable dead-time
- .
- Under-voltage lockout
- .
- Single pulse metering
- .
- Programmable soft-start
- .
- Wide current limit common mode range
- .
- TTL/CMOS compatible logic ports
- .
- Symmetry correction capability
- .
- Guaranteed 6 unit synchronization