ATSAM3N4CA-AU

ATMEL  ATSAM3N4CA-AU  微控制器, 32位, SAM3N系列, ARM 皮质-M3, 48 MHz, 256 KB, 24 KB, 100 引脚, QFP

The is a SMART SAM3N2A series 32-bit Flash Microcontroller based on the high-performance ARM Cortex-M3 RISC processor. It operates at a maximum speed of 48MHz and features 256kB of flash memory and 24kB of SRAM. The peripheral set includes an uSART, two UARTs, two SPIs, two TWIs I²C, PWM timer, six 16-bit timers, RTC, a 10-bit ADC and a 10-bit DAC. The SAM3N4C is ready for capacitive touch thanks to the Atmel QTouch® library, offering an easy way to implement buttons, wheels and sliders. It operates from 1.62 to 3.6V. The SAM3N4C is pin-to-pin compatible with the SAM3S4C. It is ready for capacitive touch with QTouch library, offering an easy way to implement buttons, wheels and sliders. The real-time event management allows peripherals to receive, react to and send events in active and sleep modes without processor intervention.

.

ARM Cortex-M3 revision 2.0 running at up to 48MHz

.

Thumb®-2 instruction set

.

24-bit SysTick counter

.

Nested vector interrupt controller

.

Embedded voltage regulator for single supply operation

.

Power-on-reset POR, brown-out detector BOD and watchdog for safe reset

.

Quartz or ceramic resonator oscillators - 3 to 20MHz and optional 32.768kHz for RTC or device clock

.

High precision factory trimmed internal RC oscillator with 4MHz default frequency

.

Slow clock internal RC oscillator as permanent low-power mode device clock

.

One PLL up to 130MHz for device clock

.

Sleep, wait and backup modes

.

Two 2-wire UARTs

.

Two 2-wire Interfaces I²C compatible

.

One SPI

.

32-bit low-power Real-time Timer RTT

.

Low-power real-time clock RTC with calendar and alarm

.

Register write protection