FXL2T245L10X

电平转换器, 双向, 2输入, 1.1 V至3.6 V电源, 3.5 ns延迟, UQFN-10

The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the V level, and the B Port tracks the V level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both Vs reach active levels allowing either V to be powered-up first. Internal power down control circuits place the device in 3-STATE if either V is removed. The Transmit/Receive T/R# input determines the direction of data flow through the device. The OE# input, when HIGH, disables both the A and B Ports by placing them in a 3-STATE condition. The FXL2T245 is designed so that the control pins T/R# and OE# are supplied by V

Features

---

 |

.

Bi-directional interface between any 2 levels from 1.1V to 3.6V

.

Fully configurable, inputs track VCC level

.

Non-preferential power-up sequencing; either VCC may be powered-up first

.

No power-up sequencing required

.

Outputs remain in 3-STATE until active VCC level is reached

.

Outputs switch to 3-STATE if either VCC is at GND

.

Power-off protection

.

Control inputs T/R#, OE# levels are referenced to VCCA voltage

.

Packaged in 10-lead Pb-Free MicroPak 1.6mm x 2.1mm package

.

ESD protection exceeds:

.

4kV HBM ESD per JESD22-A114 & Mil Std 883e 3015.7

.

8kV HBM I/O to GND ESD per JESD22-A114 & Mil Std 883e 3015.7

.

1kV CDM ESD per ESD STM 5.3

.

200V MM ESD per JESD22-A115 & ESD STM5.2