XBP24CAWIT-001

射频收发器模块, DSSS调制, 250Kbps, 2.4GHz, -101dBm, 2.7V至3.6V, SPI, UART

The from is a through hole mount XBee-PRO 802.15.4 module with wire antenna for OEM. It is a low-cost, easy-to-deploy module provides critical end-point connectivity to devices and sensors. Ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer and multipoint/star configurations, XBee 802.15.4 product enables robust end-point connectivity with ease. XBee 802.15.4 module seamlessly interfaces with compatible gateways, device adapters and range extenders, providing developers with true beyond-the-horizon connectivity. The XBee S2C 802.15.4 module is built with the SiliconLabs EM357 SoC and offers improved power consumption, support for over-the-air firmware updates and provides an upgrade path to DigiMesh® or ZigBee® mesh protocols if desired. FCC, IC North America regulatory approvals.

.

RF 250Kbps, serial up to 1Mbps data rate, point-to-multipoint network topology

.

Firmware upgrades via UART, SPI or over the air OTA

.

Indoor/urban range up to 300ft 90m, outdoor/RF line of sight range up to 2miles 3200m

.

Transmit power is 63mW +18dBm

.

Receiver sensitivity is -101dBm

.

ISM 2.4GHz frequency band, S2C hardware

.

4 10bit ADC inputs, 15 digital I/O, 128bit AES encryption

.

Operating temperature range from -40°C to +85°C, supply voltage from 2.7V to 3.6V

.

Dimension is 0.960inch x 1.297inch2.438cm x 3.294cm

.

Transmit current is 120mA at 3.3VDC and receive current is 31mA at 3.3VDC