MC9S08PT60AVLC

NXP MC9S08PT60AVLC 8Bit Microcontroller, EEPROM with TSI, MC9S08, 20MHz, 60KB, 4KB, 32Pins, LQFP

The is a 8-bit Microcontroller based on enhanced S08 CPU 20MHz bus with CISC architecture operates at a maximum frequency of 20MHz. The device incorporates 60kB internal flash, 4kB internal RAM, 256byte EEPROM, 12-channel 12-bit A/D converter and 28 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit IIC bus module to operate at up to 100kbps and two serial peripheral interface modules SPI.

.

Supporting up to 40 interrupt/reset sources

.

Supporting up to 4-level nested interrupt

.

Flash and RAM access protection

.

One low-power stop mode; reduced power wait mode

.

Peripheral clock enable register can disable clocks to unused modules

.

Loop-controlled pierce oscillator XOSC

.

Internal clock source ICS - Containing a frequency-locked-loop FLL

.

Watchdog with independent clock source

.

Low-voltage detection with reset or interrupt - selectable trip points

.

Illegal opcode detection with reset

.

Illegal address detection with reset

.

Single-wire background debug interface

.

Breakpoint capability to allow three breakpoints setting during in-circuit debugging

.

On-chip in-circuit emulator ICE debug module

.

One analog comparator with both positive and negative inputs

.

Programmable cyclic redundancy check module CRC

.

3 x Flex timer modulators modules

.

2 x Modulo timer with 8-bit prescaler and overflow interrupt

.

TSI - Supporting up to 16 external electrodes

.

2 x 8-bit Keyboard interrupt module KBI