ST92F150CV1T3

MCU 8Bit/16Bit ST9 CISC 128KB Flash 5V 100Pin LQFP Tray

The ST92F124/F150/F250 microcontroller is developed and manufactured by STMicroelectronics using a proprietary n-well HCMOS process. Its performance derives from the use of a flexible 256-register programming model for ultra-fast context switching and real-time event response. The intelligent on-chip peripherals offload the ST9 core from I/O and data management processing tasks allowing critical application tasks to get the maximum use of core resources. The new-generation ST9 MCU devices now also support low power consumption and low voltage operation for power-efficient and low-cost embedded systems.

**Key Features**

.

Memories

.

Internal memory: Single Voltage Flash up to 256 Kbytes, RAM up to 8 Kbytes, 1 Kbyte E3 TM Emulated EEPROM

.

In-Application Programming IAP

.

224 general purpose registers register file available as RAM, accumulators or index pointers

.

Clock, reset and supply management

.

Register-oriented 8/16 bit CORE with RUN, WFI, SLOW, HALT and STOP modes

.

0-24 MHz Operation Int. Clock, 4.5-5.5 V range

.

PLL Clock Generator 3-5 MHz crystal

.

Minimum instruction time: 83 ns 24 MHz int. clock

.

Up to 80 I/O pins

.

Interrupt management

.

4 external fast interrupts + 1 NMI

.

Up to 16 pins programmable as wake-up or additional external interrupt with multi-level interrupt handler

.

DMA controller for reduced processor overhead

.

Timers

.

16-bit Timer with 8-bit Prescaler, and Watchdog Timer activated by software or by hardware

.

16-bit Standard Timer that can be used to generate a time base independent of PLL Clock Generator

.

Two 16-bit independent Extended Function Timers EFTs with Prescaler, up to two Input Captures and up to two Output Compares

.

Two 16-bit Multifunction Timers, with Prescaler, up to two Input Captures and up to two Output Compares

.

Communication interfaces

.

Serial Peripheral Interface SPI with selectable Master/Slave mode

.

One Multiprotocol Serial Communications Interface with asynchronous and synchronous capabilities

.

One asynchronous Serial Communications Interface with 13-bit LIN Synch Break generation capability

.

J1850 Byte Level Protocol Decoder JBLPD

.

Up to two full I²C multiple Master/Slave Interfaces supporting Access Bus

.

Up to two CAN 2.0B Active interfaces

.

Analog peripheral low current coupling

.

10-bit A/D Converter with up to 16 robust input channels

.

Development tools

.

Free High performance development environment IDE based on Visual Debugger, Assembler, Linker, and C-Compiler; Real Time Operating System OSEK OS, CMX and CAN drivers

.

Hardware emulator and Flash programming board for development and ISP Flasher for production