3ZU2.5

Circuit Breaker; Therm/Mag; Hndl; Cur-Rtg 2.5A; DIN Rail; 3Pole; Screw Snap; Z

UL® listed to UL508 and CSA certified to C22.2 No. 14 V-EA manual motor controllers are horsepower rated for AC across-the-line motor starting, suitable for motor disconnect means and overload protection. They also can be used for AC general use, AC resistance, AC discharge lamps and AC incandescent lamps. /ABL SURSUM V-EA miniature DIN rail mount circuit breakers provide an opportunity for major cost and installation time savings and superior circuit protection.Six trip characteristics are UL® listed. All trip characteristics are internationally defined and accepted. The "G" characteristic matches USA and Canadian thermal/magnetic trip norms. All rated currents have the same housing dimensions and terminal sizes. The V-EA can be loaded with full rated current 100% breaker. Recognized with Line/Load reversibility, i.e., power feed can be field or factory wired to the screw-cage clamp terminals at the "top," range 18 AWG to 3 AWG, or at the "bottom," range 18 AWG to 2 AWG. The V-EA/U is intended for OEM industrial applications.

.

* Technical Specifications. Voltage Rating:** 480Y/277 VAC 480 VAC phase-to-phase, 277 VAC phase-to-ground/neutral. ** Interrupting Capacity:** 10 kA with UL® listed RK5 back-up fuse or MCCB. ** Electrical/Mechanical Endurance:** 10,000 ON/OFF operations. ** Calibration Temperature:** 40°C 104°F. ** Terminal Tightening Torque:** 20 in.-lb. ** International Approvals:** For various trip characteristics and rated currents, Germanischer Lloyd, SEV, SEMKO, NEMKO, etc. VDE approved on up to 25 A on B, C, and D-trip. CE mark is standard.

Thermal one-hour trip zone 1.05-1.35 times rated current RC: magnetic 100 ms trip boundary 2 to 3 times RC.