SGM4056-6.8YPS8G/TR
SGM4056-6.8YPS8G/TR 编带
The SGM4056 is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. The charger uses a CC/CV charge profile required by Li-ion battery. The charger accepts an input voltage up to 26.5V but is disabled when the input voltage exceeds the OVP threshold, typically 6.8V SGM4056-6.8 or 10.5V SGM4056-10.5, to prevent excessive power dissipation. The 26.5V rating eliminates the over-voltage protection circuit required in a low input voltage charger.
The charge current and the end-of-charge EOC current are programmable with external resistors. When the battery voltage is lower than typically 2.55V, the charger preconditions the battery with typically 18% of the programmed charge current. When the charge current reduces to the programmable EOC current level during the CV charge phase, an EOC indication is provided by the /CHG pin, which is an open-drain output. An internal thermal foldback function protects the charger from any thermal failure.
Two indication pins /PPR and /CHG allow simple interface to a microprocessor or LEDs. When no adapter is attached or when disabled, the charger draws less than 1μA leakage current from the battery.
The SGM4056 is available in Green TDFN-3×3-8L, TDFN-2×3-8L, TDFN-2×2-8L and SOIC-8 Exposed Pad packages and is rated over the -40℃ to +85℃ temperature range.
FEATURES
• Complete Charger for Single-Cell Li-ion or
Polymer Batteries
• Integrated Pass Element and Current Sensor
• No External Blocking Diode Required
• Low Component Count and Cost
• Programmable Charge Current
• Programmable End-of-Charge Current
• Charge Current Thermal Foldback for Thermal
Protection
• 2.55V Trickle Charge Threshold
• 6.8V Input Over-Voltage Protection for SGM4056-6.8
• 10.5V Input Over-Voltage Protection for SGM4056-10.5
• 26.5V Maximum Voltage for the Power Input
• Power Presence and Charge Indications
• Less than 1μA Leakage Current off the Battery When
No Input Power Attached or Charger Disabled
• Available in Green TDFN-3×3-8L, TDFN-2×3-8L,
TDFN-2×2-8L and SOIC-8 Exposed Pad Packages
