CLVTH16245AQDGGRQ1

具有三态输出的汽车类 3.3V ABT 16 位总线收发器 48-TSSOP -40 to 125

The SN74LVTH16245A is a 16-bit dual-octal noninverting 3-state transceiver designed for low-voltage 3.3-V VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control DIR input. The output-enable OE input can be used to disable the devices so that the buses are isolated.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with bus-hold circuitry is not recommended.