ADA4841-1YRZ-RL
低功耗,低噪声和失真,轨到轨输出放大器 Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier
Product Details
The ADA4841-1 is a unity gain stable, low noise and distortion, rail-to-rail output amplifier that has a quiescent current of 1.5 mA maximum. In spite of its low power consumption, this amplifier offers low wideband voltage noise performance of 2.1 nV/√Hz and 1.4 pA/√Hz current noise, along with excellent spurious-free dynamic range SFDR of −105 dBc at 100 kHz. To maintain a low noise environment at lower frequencies, the amplifier has low 1/f noise of 7 nV/√Hz and 13 pA/√Hz at 10 Hz.
The ADA4841-1 output can swing to less than 50 mV of either rail. The input common-mode voltage range extends down to the negative supply. The ADA4841-1 can drive up to 10 pF of capacitive load with minimal peaking.
The ADA4841-1 provides the performance required to efficiently support emerging 16-bit to 18-bit ADCs and is ideal for portable instrumentation, high channel count, industrial measurement, and medical applications. The ADA4841-1 is ideally suited to drive the AD7685/AD7686, 16-bit PulSAR ADCs.
The ADA4841-1 package features RoHS compliant lead finishes. The amplifier is rated to work over the industrial temperature range −40°C to +125°C.
**Applications**
- .
- Low power, low noise signal processing
- .
- Battery-powered instrumentation
- .
- 16-bit PulSAR® ADC drivers
### Features and Benefits
- .
- Low power: 1.1 mA/amp
- .
- Low wideband noise
- .
- 2.1 nV/√Hz
- .
- 1.4 pA/√Hz
- .
- Low 1/f noise
- .
- 7 nV/√Hz @ 10 Hz
- .
- 13 pA/√Hz @ 10 Hz
- .
- Low distortion: −105 dBc @ 100 kHz, VO = 2 V p-p
- .
- High speed
- .
- 80 MHz, −3 dB bandwidth G = +1
- .
- 12 V/μs slew rate
- .
- 175 ns settling time to 0.1%
- .
- Low offset voltage: 0.3 mV maximum
- .
- Rail-to-rail output
- .
- Power down
- .
- Wide supply range: 2.7 V to 12 V