C0603X331J5GACAUTO

KEMET  C0603X331J5GACAUTO  多层陶瓷电容器, 表面贴装, AEC-Q200 MLCC系列, 330 pF, ± 5%, C0G / NP0, 50 V, 0603 [1608 公制]

KEMET"s Flexible Termination FT-CAP MLCC in C0G dielectric incorporates a unique, flexible termination system that is integrated with KEMET"s standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET"s standard termination system in order to establish pliability while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs- flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Capacitance change with reference to ambient temperature is limited to ±30 ppm/ºC from -55°C to +125°C.