MC74VHC245DWR2G

缓冲器/线路驱动器, 74VHC245, 2V至5.5V, SOIC-20

The MC74VHC245 is an advanced high speed CMOS octal bus transceiver fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. It is intended for two-way asynchronous communication between data buses. The direction of data transmission is determined by the level of the DIR input. The output enable pin OE can be used to disable the device, so that the buses are effectively isolated. All inputs are equipped with protection circuits against static discharge.

Features

---

 |

.

High Speed: tPD = 4.0ns Typ at VCC = 5V

.

Low Power Dissipation: ICC = 4µA Max at TA = 25 C

.

High Noise Immunity: VNIH = VNIL = 28% VCC

.

Power Down Protection Provided on Inputs

.

Balanced Propagation Delays

.

Designed for 2V to 5.5V Operating Range

.

Low Noise: VOLP = 1.2V Max

.

Pin and Function Compatible with Other Standard Logic Families

.

Latchup Performance Exceeds 300mA

.

ESD Performance: HBM > 2000V; Machine Model > 200V

.

Chip Complexity: 308 FETs or 77 Equivalent Gates

APPLICATION NOTES

.

Do not force a signal on an I/O pin when it is an active output,

damage may occur.

.

All floating high impedance input or I/O pins must be fixed by

means of pull up or pull down resistors or bus terminator ICs.

.

A parasitic diode is formed between the bus and VCC terminals.

Therefore, the VHC245 cannot be used to interface 5V to 3V systems

directly.

.

These devices are available in Pb-free packages. Specifications herein apply to both standard and Pb-free devices. Please see our website at www.onsemi.com for specific Pb-free orderable part numbers, or contact your local sales office or representative.